topic Re: Bridge authentication using EAP in Wireless https://community.cisco.com/t5/wireless/bridge-authentication-using-eap/m-p/405582#M124181 <HTML><HEAD></HEAD><BODY><P>I talked to TAC and found out that the non-root BR1310 supports authentication as a client only using LEAP. So, I'm back to using the built-in RADIUS server instead of my corporate one.</P></BODY></HTML> Mon, 09 Jan 2006 23:46:18 GMT kentdaniel 2006-01-09T23:46:18Z Bridge authentication using EAP https://community.cisco.com/t5/wireless/bridge-authentication-using-eap/m-p/405581#M124180 <P>Hi all,</P><P></P><P>I'm trying to connect two buildings using a point-to-point wireless connection. I'm not having any luck getting a non-root BR1310 to connect to a root BR1310 using open authentication with EAP. My non-root bridge keeps throwing up the error: Interface Dot11Radio0, cannot associate: EAP authenticating.</P><P></P><P>I have the setup currnetly working using LEAP to the Root's RADIUS server. However, I'd really prefer the RADIUS authentcation use my corporate IAS server which doesn't support LEAP.</P><P>Any suggestions?</P><P></P><P>Thanks!</P> Sun, 04 Jul 2021 18:28:04 GMT https://community.cisco.com/t5/wireless/bridge-authentication-using-eap/m-p/405581#M124180 kentdaniel 2021-07-04T18:28:04Z Re: Bridge authentication using EAP https://community.cisco.com/t5/wireless/bridge-authentication-using-eap/m-p/405582#M124181 <HTML><HEAD></HEAD><BODY><P>I talked to TAC and found out that the non-root BR1310 supports authentication as a client only using LEAP. So, I'm back to using the built-in RADIUS server instead of my corporate one.</P></BODY></HTML> Mon, 09 Jan 2006 23:46:18 GMT https://community.cisco.com/t5/wireless/bridge-authentication-using-eap/m-p/405582#M124181 kentdaniel 2006-01-09T23:46:18Z