https://community.cisco.com/t5/wireless/access-point-configuration/m-p/3787726#M124264 <P>Hi CompCJtoo,</P> <P>&nbsp;</P> <P>You can override on a per AP basis the SSH/ Telnet Settings and the AP logins.</P> <P>This is found under Wireless&gt;All APs&gt;Click on AP</P> <P>Credentials and the Advance TAB</P> <P>The SNMP, NTP and Syslog I believe for lightweight APs that this is not possible to change on a per AP Basis, and these will be loaded from the WLC.</P> <P>&nbsp;</P> <P>cheers</P> <P>Haydn</P> Fri, 25 Jan 2019 02:51:22 GMT Haydn Andrews 2019-01-25T02:51:22Z https://community.cisco.com/t5/wireless/access-point-configuration/m-p/3787646#M124263 <P>Hi All.&nbsp; Is it possible to configure individual APs that are joined to a controller for settings such as login banner, username/password, syslog, ssh, ntp, and snmp?&nbsp; Or do the APs essentially take on the configuration of the controller once they join?&nbsp; Thanks.</P> Mon, 05 Jul 2021 16:44:51 GMT https://community.cisco.com/t5/wireless/access-point-configuration/m-p/3787646#M124263 CompCJtoo 2021-07-05T16:44:51Z https://community.cisco.com/t5/wireless/access-point-configuration/m-p/3787726#M124264 <P>Hi CompCJtoo,</P> <P>&nbsp;</P> <P>You can override on a per AP basis the SSH/ Telnet Settings and the AP logins.</P> <P>This is found under Wireless&gt;All APs&gt;Click on AP</P> <P>Credentials and the Advance TAB</P> <P>The SNMP, NTP and Syslog I believe for lightweight APs that this is not possible to change on a per AP Basis, and these will be loaded from the WLC.</P> <P>&nbsp;</P> <P>cheers</P> <P>Haydn</P> Fri, 25 Jan 2019 02:51:22 GMT https://community.cisco.com/t5/wireless/access-point-configuration/m-p/3787726#M124264 Haydn Andrews 2019-01-25T02:51:22Z