https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738168#M124303 <P>Alex,</P> <P>&nbsp;</P> <P>Yes you should config port channel on the switch.</P> <P>&nbsp;</P> <P>Here is Cisco's Config doc if you need it</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/200898-Link-aggregation-on-1800-2800-3800-AP.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/200898-Link-aggregation-on-1800-2800-3800-AP.html</A></P> Fri, 02 Nov 2018 18:36:31 GMT d.friday 2018-11-02T18:36:31Z https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738132#M124302 <P>When connecting a Cisco 2802 wireless access point with 2 ports (utilizing the AUX port), should the switch be conected with a port-channel?</P> Mon, 05 Jul 2021 16:24:15 GMT https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738132#M124302 Alex Pfeil 2021-07-05T16:24:15Z https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738168#M124303 <P>Alex,</P> <P>&nbsp;</P> <P>Yes you should config port channel on the switch.</P> <P>&nbsp;</P> <P>Here is Cisco's Config doc if you need it</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/200898-Link-aggregation-on-1800-2800-3800-AP.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3800-series-access-points/200898-Link-aggregation-on-1800-2800-3800-AP.html</A></P> Fri, 02 Nov 2018 18:36:31 GMT https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738168#M124303 d.friday 2018-11-02T18:36:31Z https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738296#M124304 Please DON'T use the AUX port. Fri, 02 Nov 2018 22:10:47 GMT https://community.cisco.com/t5/wireless/cisco-2800-wireless-access-points/m-p/3738296#M124304 Leo Laohoo 2018-11-02T22:10:47Z