https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393693#M124448 <P>ACL is the way to go on your L3 switch that defined wired &amp; wireless SVI</P> <P>&nbsp;</P> <P>HTH</P> <P>Rasika</P> <P>*** Pls rate all useful responses ***</P> Mon, 04 Jun 2018 14:37:40 GMT Rasika Nayanajith 2018-06-04T14:37:40Z https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393628#M124447 <P>Hello All, If i have the requirement to restrict Wireless connected users (Cisco WLC environment) to access the Wired users, do i have the way to do in WLC itself instead of configuring IP based ACLs ?</P> <P>&nbsp;</P> <P>Thanks</P> <P>Sairam</P> Mon, 05 Jul 2021 15:42:33 GMT https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393628#M124447 snarayanaraju 2021-07-05T15:42:33Z https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393693#M124448 <P>ACL is the way to go on your L3 switch that defined wired &amp; wireless SVI</P> <P>&nbsp;</P> <P>HTH</P> <P>Rasika</P> <P>*** Pls rate all useful responses ***</P> Mon, 04 Jun 2018 14:37:40 GMT https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393693#M124448 Rasika Nayanajith 2018-06-04T14:37:40Z https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393740#M124449 <P>Thank you Rasika</P> Mon, 04 Jun 2018 16:15:18 GMT https://community.cisco.com/t5/wireless/restrict-wireless-amp-wired-access/m-p/3393740#M124449 snarayanaraju 2018-06-04T16:15:18Z