topic WLN configs look good. in Wireless

User complaining slow when accessing wireless

Ken Le — Mon, 05 Jul 2021 13:55:27 GMT

Would like to check if there are users complaining slow when accessing wireless, AP3602i and WLC5508, any bandwitdh tool from Cisco can use
to really identify that the problem is with the WLC or merely the wireless traffic problem?

Or any other places or section I can check, example Cisco Prime ?

Thanks.

Regards,
ken

paste the output of the

Sandeep Choudhary — Tue, 25 Apr 2017 05:41:55 GMT

paste the output of the command to check how you configured it:

sh wlan <id>

Regards

Dont forget to rate helpful posts

Hi Sandeep,

Ken Le — Tue, 25 Apr 2017 06:38:18 GMT

Hi Sandeep,

Thanks for your reply.

Attached is the sh wlan 3 for the wireless configuration.

Appreciate your help.

WLN configs look good.

Sandeep Choudhary — Tue, 25 Apr 2017 08:06:27 GMT

WLN configs look good.

it would be good if you can share your topology ...how your network looks like ??

Setup and iperf server on the

Scott Fella — Tue, 25 Apr 2017 08:48:10 GMT

Setup and iperf server on the wired network and test throughput with a wireless iperf client. What you want to isolate is if throughput is slow internal to the site or when traffic egress the site. This can help you pinpoint where you need to start troubleshooting.

Also, what are user saying about the slowness, than its slow? I'm guessing your not onsite to see if you can reproduce or actually see if the wireless is slow?

-Scott

*** Please rate helpful posts ***

hi Sandeep,

Ken Le — Wed, 26 Apr 2017 01:19:42 GMT

hi Sandeep,

network topology is just simple layer 2 with wireless IP range for all the floors.

Another thing, would like to check if around 6Mbps/sec , is that consider normal for an access to the AP 3602i from your experience ?

Thanks.

Hi Scott

Ken Le — Wed, 26 Apr 2017 01:20:46 GMT

Hi Scott

Thanks for your reply. May i know if a tools is required to setup the iperf? I would do so once got the relevant info.

Regards