topic Cisco 3702i Autonomous Access Point - Convert WPA2 Enterprise to WPA2 Personal in Wireless

Cisco 3702i Autonomous Access Point - Convert WPA2 Enterprise to WPA2 Personal

recent2Cisco — Mon, 05 Jul 2021 12:58:19 GMT

Cisco TAC and I configured my 3702i wireless access point. When configuring the 2.4GHz radio for my SSID, in the Security dropdown, WPA2-PSK was selected and the Pre-Shared Key was entered.

When I attempt to join my SSID, I get the message that the network requires WPA2 Enterprise credentials and asks for a Username and Password. I don't believe Cisco TAC and I setup WPA2 Enterprise.

Is there a way to configure the 3702i to use WPA2 Personal? Using the GUI? If so, how?

Thank you!

Can you paste the complete

Sandeep Choudhary — Fri, 14 Oct 2016 09:40:00 GMT

Can you paste the complete conifg of AP.

Here is the guide (GUI):http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116599-config-wpa-psk-00.html

Regards

Dont forget to rate helpful posts

Thank you for the reply

recent2Cisco — Sat, 15 Oct 2016 00:15:58 GMT

Thank you for the reply Sandeep. Unfortunately, following the instructions in the guide did not work; I don't know why. Another call to Cisco TAC and we figured it out.

Paste the conf via cli.

Sandeep Choudhary — Sat, 15 Oct 2016 06:03:09 GMT

Paste the conf via cli.

will try to find the issue.