topic Refer link : http://www.cisco in Wireless

Cisco Access Point Mac Filtering

recent2Cisco — Mon, 05 Jul 2021 12:36:17 GMT

I have a Cisco 3702i AP that's been converted to autonomous. Is it possible to setup MAC filtering on each SSID that I define? In this way, only certain devices connect to each individual SSID; example - certain devices connect on the 2.4Ghz SSID and certain devices connect on the 5Ghz SSID. This would be fantastic if I could do that.

Refer link : http://www.cisco

mohanak — Thu, 11 Aug 2016 01:55:56 GMT

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap16-filters.html#pgfId-1099666

hi,

johnlloyd_13 — Thu, 11 Aug 2016 06:08:36 GMT

hi,

there's no MAC filtering option on autonomous AP to limit which SSID and which radio.

it's also stated per link given by mohanak.

ap(config)#dot11 association ?
mac-list filter client with a MAC address access list

ap(config)#dot11 association mac-list ?
<700-799> Ethernet address access list

ap(config)#dot11 association mac-list 700 ?
<cr>

Step 2 Use the global configuration command dott11 association mac-list list-number to apply the use the MAC address access list as a filter for all wireless client associations, on all radios.
Clients not listed in the MAC address access-list will not be allowed to associate to any of the AP SSIDs, on any of the AP radios.

johnlloyd_13 and mohanak,

recent2Cisco — Thu, 11 Aug 2016 20:30:46 GMT

johnlloyd_13 and mohanak,

Thank you for your responses. That does help.