topic Prakash, +1 and endorsement . in Wireless

Limiting Bandwidth Internet Access

rogatien1977 — Mon, 05 Jul 2021 10:54:56 GMT

Hello,
I have a controller Anchor DMZ .
external users to connect to the company Guest SSID to connect to the Internet.
Can I make a limation bandwidth for these users.

Yes You can do that by

Prakash Parvathala — Fri, 11 Sep 2015 11:12:26 GMT

Yes You can do that by Configuring Quality of Service(QOS) Roles in controller and you can apply the bandwidth limitation

Go to the QoS profile on your controller and enter in values similar to this: note this would throttle the average data rate to 250k

Per-User Bandwidth Contracts

- Average Data Rate: 250kbps

- Burst Data Rate: 500kbps

- Average Real-Time Rate: 250kbps

- Burst Real-Time Rate: 500kbps

Please refer the below link for configuration guidance.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70ccfg.html#pgfId-1254532

Prakash, +1 and endorsement .

George Stefanick — Sat, 12 Sep 2015 14:31:07 GMT

Prakash,

+1 and endorsement ..

You can also throttle at different parts of your network on the wire. However its always best as close to the edge has possible.