topic Access Point support on WiSM 2 in Wireless

Access Point support on WiSM 2

thomas03usmcsf — Sun, 04 Jul 2021 03:54:01 GMT

I think I already know the answer, but I cannot find any solid documentation. Does the WiSM2 support the 1231G AP, if so can anyone provide documentation?

Thanks.

Access Point support on WiSM 2

Stephen Rodriguez — Mon, 10 Oct 2011 18:27:22 GMT

Thomas,

It does. The AP is based on the software release for the most part, and not the hardware. Release notes for 7.0.116.0, list them as supported.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp610751

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Access Point support on WiSM 2

thomas03usmcsf — Mon, 10 Oct 2011 18:29:15 GMT

Thanks.

Access Point support on WiSM 2

Jorge Luis Covenas Chiroque — Tue, 16 Apr 2013 15:40:50 GMT

Stephen,

In the following link http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_3_112_0.html
it says AP 1131 it's still supported in 7.3.112.0. But for 1232 Last Support is mentioned as 7.0.x.

I have a network with WiSM2 as controller and several 1131 and 1232. My Controller version es 7.2.110.0 and both models of AP are working.

Now, I have customers with Windows 8 and I need to upgrade from 7.2.110.0 to 7.3.112.0. Will the Cisco AP 1232 still supported in version 7.3.112.0? If not, What alternative I had to take in order to support Windows 8 customer with AP 1232?

Thanks a lot for your answer.

Jorge Covenas