topic Cisco AnyConnect- Network Access Manager- Question to Profile Configuration in Wireless

Cisco AnyConnect- Network Access Manager- Question to Profile Configuration

dagmar.gertz1 — Mon, 05 Jul 2021 10:13:11 GMT

Hi all,

I'm actually trying to configure an additional wireless LAN Connection with immediate and Root Certificate, EAP- PEAP Connection, connecting with user Login to a different Domain and different user credentials.

I get error after Login "Authentication failed"- probably because I'm not sure how to configure credentials for User in PEAP:

see attached Screenshots- Any help very appreciated!

Thanks in Advance

Refer the link :http://www

mohanak — Tue, 12 May 2015 10:07:26 GMT

Refer the link :

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/b_AnyConnect_Administrator_Guide_chapter_00.html

mohanak, thanks, a lotThis

dagmar.gertz1 — Tue, 12 May 2015 10:34:49 GMT

mohanak, thanks, a lot

This is what me (and some of my colleagues) read several times before, but it seems not be helpful for someone who is not involved with PEAP certificates and Cisco Anyconnect Configuration in the deep.

As I understood, the placeholder stands for entries in the Certificate or System variables- our certificates is a generell certificates without refering to user or host, the System variables are refering to the wrong credentials, as local user is different to Domain, we are trying to connect - I would like to implement that the Information, the user enters in format

mydomain\myusername

is used to authenticate the user- as far as I understood [raw] would be the right option to realize this, but this didn't work.

unfortunately i can check this only when I'm on the site- I tried severel options but none did work-

Help is still very appreciated!

Thanks in advance!