topic Hi.Yes you can, but you need in Wireless

Cisco 5500 Time Base access

Aknab Aknab — Mon, 05 Jul 2021 09:07:42 GMT

Hi Guys,

Is it possible to do time base access for Cisco 5500, like per AP or SSID active from 8am - 8pm? Thanks

Hi.Yes you can, but you need

Daniel Ordóñez Flores — Mon, 15 Dec 2014 03:14:26 GMT

Hi.

Yes you can, but you need a WCS to do this.

http://www.cisco.com/c/en/us/td/docs/wireless/wcs/7-0/configuration/guide/WCS70cg/7_0apcfg.html#wp1059086

Please check: Scheduling Radio Status

**please rate useful answers**

There are a few different

Scott Fella — Mon, 15 Dec 2014 03:20:50 GMT

There are a few different ways to achieve this. If you search on this forum, you will feel bs ways to do this if you have WCS/NCS/PI. You can also achieve this using local policies:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75/b_cg75_chapter_0111100.html

If your SSID is using 802.1x, you can also configure a radius policy to only allow authentication between certain times. Here is a link to Microsoft NPS for time based restrictions. Many radius server has similar setup.

http://technet.microsoft.com/en-us/library/cc731220%28v=ws.10%29.aspx

-Scott