topic Re: Access Point Predownload Process in Wireless

Access Point Predownload Process

ppellettiere — Sun, 04 Jul 2021 03:02:27 GMT

I want to upgrade my wireless controller (WISM) to 6.0.19x.0.

My question is does controller software version 6.0.188.0 and1242 and 1231 AP's

support the access point predownload process?

Re: Access Point Predownload Process

Surendra BG — Mon, 04 Apr 2011 16:55:42 GMT

Hi,

From the Configuration guide 6.0 , we have the pre download available.. so this is supported.. However not on the AP 1230 series.. (not supported on 1230)

here is the link..

http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mfw.html#wp1132291

Lemme know if this answered ur question!!

Regards

Surendra

Re: Access Point Predownload Process

ppellettiere — Mon, 04 Apr 2011 17:04:09 GMT

Thanks for answering the question.

Do you know, since I have a mixed campus of 1231's and 1242's

Could I use the predownload on the 1242's or is it an

all or nothing on the controller?

Re: Access Point Predownload Process

Surendra BG — Mon, 04 Apr 2011 17:14:48 GMT

Hi,

the below link will give u more info on assigning the IP to the LWAPP AP..

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml#backinfo

To enable LAG on the WLC, Open the WLC GUI and Monitor >> Controller >> General >> LAG >> Enable >> Reboot.

Lemme know if this answered ur question!!

Regards

Surendra

Re: Access Point Predownload Process

Surendra BG — Mon, 04 Apr 2011 17:17:15 GMT

Hi,

I am Sorry,.. discard my previous post.. thats for another post!! By mistake i pasted der!!

here is the answer for urs..

If the pre download is used then it will apply only to the supported APs not for un supported!! SO u can use it but it gets applied only to 1240 series APs!!

lemme know if this answered ur question!!

Regards

Surendra