topic You can find the part numbers in Wireless

1522 Outdoor Access Point Clarification

ciscokid7181 — Mon, 05 Jul 2021 07:48:05 GMT

Dear Folks,

One of our client requires Outdoor Access Points across the campus, UTP outdoor cable would be provided.

I would like to clarify the following points

1. Does the Standard model 1522 Access Point support POE that can take direct from POE Switch or is POE injector mandatory ?

2. Is mounting kit included or ordered extra ?

Appreciate your kind help and support .

Regards,

SID

Outdoor APs require injectors

Leo Laohoo — Fri, 09 May 2014 08:07:25 GMT

Outdoor APs require injectors.

Thanks, If i purchase this

ciscokid7181 — Fri, 09 May 2014 08:23:14 GMT

Thanks,

If i purchase this unit, does it come along with the power cable and adaptor ? As i dont see in the configurator / datasheet , i assume it is built in .

Regards,

SID

You can find the part numbers

Scott Fella — Fri, 09 May 2014 16:02:20 GMT

You can find the part numbers here:

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/product_data_sheet0900aecd8066a157.html

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

Typically you would hard wire

Scott Fella — Fri, 09 May 2014 16:04:32 GMT

Typically you would hard wire the power to the units that are considered MAP's, or the AC adapter. The RAP's typically would have a power injector to power that unit up.

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty