https://community.cisco.com/t5/wireless/point-to-point-wireless-brdiges/m-p/2437065#M125957 <P>point to point wireless bridge failed after upgrading WLC from 4400 with 7.0 IOS to 2504 with 7.4.100 IOS. The AP's keeps disassociating and associating to WLC.</P><P>The connected switch to the root AP is reporting BPDU vlan mismatch.</P><P>Enabling the BPDU on the interface on the switch will keep the AP's associated but still only one vlan is passed.</P><P>I was able to do this with older 4400 7.0 IOS with multiple vlans passed but not with new hardware and software.</P><P>Thanks</P> Mon, 05 Jul 2021 07:46:28 GMT rnaser123 2021-07-05T07:46:28Z https://community.cisco.com/t5/wireless/point-to-point-wireless-brdiges/m-p/2437065#M125957 <P>point to point wireless bridge failed after upgrading WLC from 4400 with 7.0 IOS to 2504 with 7.4.100 IOS. The AP's keeps disassociating and associating to WLC.</P><P>The connected switch to the root AP is reporting BPDU vlan mismatch.</P><P>Enabling the BPDU on the interface on the switch will keep the AP's associated but still only one vlan is passed.</P><P>I was able to do this with older 4400 7.0 IOS with multiple vlans passed but not with new hardware and software.</P><P>Thanks</P> Mon, 05 Jul 2021 07:46:28 GMT https://community.cisco.com/t5/wireless/point-to-point-wireless-brdiges/m-p/2437065#M125957 rnaser123 2021-07-05T07:46:28Z https://community.cisco.com/t5/wireless/point-to-point-wireless-brdiges/m-p/2437066#M125958 <P>Refer : https://supportforums.cisco.com/discussion/10832776/point-point-bridge-configuration</P><P>&nbsp;</P> Thu, 11 Sep 2014 20:34:05 GMT https://community.cisco.com/t5/wireless/point-to-point-wireless-brdiges/m-p/2437066#M125958 Saurav Lodh 2014-09-11T20:34:05Z