topic Re: Access Point Positioning in Wireless

Access Point Positioning

Joe.Mathews — Mon, 05 Jul 2021 07:15:54 GMT

Hello Everyone

What is the best practise for positioning the Access Point and antenna. AP models are 2600 and 3600. Can we change the radio coverage area of an AP from a WLC

Thanks < Joe >

Re: Access Point Positioning

Sandeep Choudhary — Mon, 24 Feb 2014 06:48:39 GMT

Hi Joe,

Here is the document :

https://supportforums.cisco.com/docs/DOC-16627

You can change the radio coverage area of an AP when you modify the transmitter power level parameter.

The transmitter power (mW) setting determines the power level of the radio transmitter.** The default power setting is the highest transmit power allowed in a regulatory domain**. Government regulations define the highest power level for radio devices.

Regards
Don't forget to rate helpful posts

Sent from Cisco Technical Support iPhone App

Re: Access Point Positioning

kaaftab — Mon, 24 Feb 2014 09:58:32 GMT

check the following link for best preactices for AP

http://www.cisco.com/c/en/us/td/docs/wireless/technology/7920/site_survey/guide/7920ssg/survbest.html