topic Copy Access-List in Wireless

Copy Access-List

Daniel Ordóñez Flores — Sun, 04 Jul 2021 07:51:45 GMT

Hello guy.

I have one question, I have a WLC 5508 and I have some WLC I need to know if is possible copy this ACL and paste on my secondary WLC.

I was wondering because I don´t wan to create them again GUI interface.

Thanks

Copy Access-List

Stephen Rodriguez — Tue, 17 Sep 2013 19:38:23 GMT

sure, pull a show run-config and copy the ACL. When you go to paste into the othe WLC type config first, and it should paste in

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Copy Access-List

Rasika Nayanajith — Tue, 17 Sep 2013 19:44:15 GMT

It should be "show run-config commands" I think steve miss it in hurry

else if you have a backup of your 5508, then you can find the same from there

HTH

Rasika

Copy Access-List

harvisin — Tue, 17 Sep 2013 22:40:13 GMT

HEllo,

issue the command: show running configuration in the wlc 5508, copy the particular access-list and then go to the other WLC in shich you want to add and in the configuration mode add the access-list.

Copy Access-List

Rasika Nayanajith — Wed, 18 Sep 2013 09:34:57 GMT

Hi Harvinder,

Are you sure about "show running configuration" exist in 5508 ? I do not think so

Rasika