topic i have this problem too in Wireless

Access Point IOS

yusufbudi — Sun, 04 Jul 2021 07:30:48 GMT

Hi team

whar are the difference between SWAP1600-RCOVRY-K9 and SWLAP1600-MESH-K9 ios for AIR-CAP XXX

Thanks

Re: Access Point IOS

Scott Fella — Thu, 25 Jul 2013 03:08:52 GMT

Rcv is the normal recovery image. The mesh image is if you want to do mesh, but you can always run mesh when the ap joins the WLC. The rcv is what you want.

Sent from Cisco Technical Support iPhone App

Access Point IOS

huu hieu — Mon, 06 Jan 2014 10:56:20 GMT

Hi Scott Fella,

I used AP 1602I-E and 2602E-E, with wireless controller 5508 (100 license).

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

And what is different between both ?

Thanks so much

Access Point IOS

Leo Laohoo — Mon, 06 Jan 2014 11:09:44 GMT

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

Use "SWAP1600-RCOVRY-K9".

i have this problem too

tryeng001 — Wed, 11 Mar 2015 03:03:11 GMT

i have this problem too please help to answer on this soon, thank.

SWAP1600-RCOVRY-K9 IOS

Abhishek Abhishek — Mon, 16 Mar 2015 09:13:03 GMT

SWAP1600-RCOVRY-K9 IOS Wireless LAN Recovery-should be used for Controller based deployment

AND

SWLAP1600-MESH-K9 Enterprise Wireless Mesh - AP1600I Controller-based SW Image-used for Wireless MESH deployments only

i have this problem too

Leo Laohoo — Tue, 17 Mar 2015 04:11:30 GMT

i have this problem too please help to answer on this soon, thank.

You need to tell us what the problem is. We can't read your mind.