topic LWAPP c1252 enable telnet access in Wireless https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107018#M126774 <HTML><HEAD></HEAD><BODY><P> The command "sh logs" will tell you the joining process.</P></BODY></HTML> Mon, 12 Nov 2012 04:46:27 GMT Leo Laohoo 2012-11-12T04:46:27Z LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107014#M126770 <P>Hi,</P><P></P><P>I face with this simple problem...I have this LAP c1252 and it won't registered to the WCS/WLC....</P><P></P><P>My Tier3 like to telnet/ssh to it to diagnosis but I am stuck as in how to enable telnet/ssh access on the LAP c1252 (I have console access to the c1252)? I perform some searches in Google and found that you can only do it via the WCS CLI command...But the c1252 has not registered to the controller yet, how do I issue the command when the AP is not registered yet?</P><P></P><P>Seems like it's a chicken/egg issue to me?</P><P></P><P>Any advise/help will be greatly appreciated...</P> Sun, 04 Jul 2021 06:01:16 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107014#M126770 choywy 2021-07-04T06:01:16Z Re: LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107015#M126771 <HTML><HEAD></HEAD><BODY><P>You can't enable telnet unless the ap is joined to the WLC. What you need to do is console into the ap and reboot it. The output will tell you why it's not joining.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Mon, 12 Nov 2012 03:43:35 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107015#M126771 Scott Fella 2012-11-12T03:43:35Z Re: LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107016#M126772 <HTML><HEAD></HEAD><BODY><P>Take a look at this link<BR /><BR /><A href="http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml" target="_blank">http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml</A><BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Mon, 12 Nov 2012 03:44:52 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107016#M126772 Scott Fella 2012-11-12T03:44:52Z LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107017#M126773 <HTML><HEAD></HEAD><BODY><P>Thanks...is there a command that I can issue in the c1252 to see which controllers is it register to?</P></BODY></HTML> Mon, 12 Nov 2012 04:22:43 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107017#M126773 choywy 2012-11-12T04:22:43Z LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107018#M126774 <HTML><HEAD></HEAD><BODY><P> The command "sh logs" will tell you the joining process.</P></BODY></HTML> Mon, 12 Nov 2012 04:46:27 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107018#M126774 Leo Laohoo 2012-11-12T04:46:27Z LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107019#M126775 <HTML><HEAD></HEAD><BODY><P>ap#show capwap client rcb</P></BODY></HTML> Mon, 12 Nov 2012 06:06:09 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107019#M126775 Saravanan Lakshmanan 2012-11-12T06:06:09Z Re: LWAPP c1252 enable telnet access https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107020#M126776 <HTML><HEAD></HEAD><BODY><P>When you console into the ap, the output you see when the ap has been rebooted and is in the join process will tell you what WLC it has joined if it does indeed join a WLC. Since you did have console access, you also could of entree the WLC IP address to tell the ap to join that specific WLC.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Mon, 12 Nov 2012 13:43:27 GMT https://community.cisco.com/t5/wireless/lwapp-c1252-enable-telnet-access/m-p/2107020#M126776 Scott Fella 2012-11-12T13:43:27Z