Controller pointing to wrong ldap server

polleyjb01 — Sun, 04 Jul 2021 03:57:13 GMT

I have a 4404 controller. Under my main WLAN/SSID I have it pointing to a new server with LDAP on it. I do those under the WLAN > security > AAA settings.

I also have the new LDAP server created under Security > AAA > LDAP.

My problem is that when I shutdown the old LDAP server I can't login through the web auth anymore. When I trun the server back on web auth starts working again. Under the SSID/WLAN I set it to my new LDAPS servers IP.

Also If I delete the old LDAP servers config out of Security > AAA > LDAP my web auth stops working to.

I don't understand why. As far as I can see, I'm telling the controller to use our new server. Other then the two places on the controller I talked about above, is there anywhere else he that ldap settings need to be configured?

Controller pointing to wrong ldap server

Stephen Rodriguez — Wed, 19 Oct 2011 18:57:50 GMT

Brandon,

Those are the only two places where you would configure the server.

I'd do a sniff of the WLC port(s) to see what's going on, when you disable the "old" server.

HTH,
Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the quesiton as answered so that it can be found later.

topic Controller pointing to wrong ldap server in Wireless

Controller pointing to wrong ldap server

Controller pointing to wrong ldap server