topic Re: 1240AG Access Point/Native VLAN/VLAN Problem in Wireless https://community.cisco.com/t5/wireless/1240ag-access-point-native-vlan-vlan-problem/m-p/1027505#M127894 <HTML><HEAD></HEAD><BODY><P>Nope.... you need to be able to define the vlans on the switch. You need a switch where you can configure a dot1q trunck and then you can make this work. Right now, you can only have one.</P></BODY></HTML> Tue, 24 Jun 2008 16:55:58 GMT Scott Fella 2008-06-24T16:55:58Z 1240AG Access Point/Native VLAN/VLAN Problem https://community.cisco.com/t5/wireless/1240ag-access-point-native-vlan-vlan-problem/m-p/1027504#M127893 <P>Need to setup several SSID's with different Encryption levels. The access point connects to a plain D-link switch, not able to define a truck on the switch which is causing problems when only one of the SSID's is set for Native VLAN (DHCP server cannot be contacted with the other SSID's).</P><P></P><P>Anyway to get around this problem !!!!</P><P></P> Sat, 03 Jul 2021 23:04:24 GMT https://community.cisco.com/t5/wireless/1240ag-access-point-native-vlan-vlan-problem/m-p/1027504#M127893 smartin 2021-07-03T23:04:24Z Re: 1240AG Access Point/Native VLAN/VLAN Problem https://community.cisco.com/t5/wireless/1240ag-access-point-native-vlan-vlan-problem/m-p/1027505#M127894 <HTML><HEAD></HEAD><BODY><P>Nope.... you need to be able to define the vlans on the switch. You need a switch where you can configure a dot1q trunck and then you can make this work. Right now, you can only have one.</P></BODY></HTML> Tue, 24 Jun 2008 16:55:58 GMT https://community.cisco.com/t5/wireless/1240ag-access-point-native-vlan-vlan-problem/m-p/1027505#M127894 Scott Fella 2008-06-24T16:55:58Z