topic problems with a repeater access point in Wireless https://community.cisco.com/t5/wireless/problems-with-a-repeater-access-point/m-p/182699#M128389 <P>When configuring a repeater access point, the log file displays the following messages:</P><P> "associated to parent [aaaa]"</P><P>"reassociate response from parent [aaaa]"</P><P>several times in a second (never stop), and the following warning message appear:</P><P></P><P>"failed to send packet on port awc0" (error = 0x00000041)</P><P></P> Sun, 04 Jul 2021 15:48:28 GMT gestmng 2021-07-04T15:48:28Z problems with a repeater access point https://community.cisco.com/t5/wireless/problems-with-a-repeater-access-point/m-p/182699#M128389 <P>When configuring a repeater access point, the log file displays the following messages:</P><P> "associated to parent [aaaa]"</P><P>"reassociate response from parent [aaaa]"</P><P>several times in a second (never stop), and the following warning message appear:</P><P></P><P>"failed to send packet on port awc0" (error = 0x00000041)</P><P></P> Sun, 04 Jul 2021 15:48:28 GMT https://community.cisco.com/t5/wireless/problems-with-a-repeater-access-point/m-p/182699#M128389 gestmng 2021-07-04T15:48:28Z Re: problems with a repeater access point https://community.cisco.com/t5/wireless/problems-with-a-repeater-access-point/m-p/182700#M128390 <HTML><HEAD></HEAD><BODY><P>1 Upgrade firmware on the device to 12.03T</P><P>2 Reset the device configuration on the repeater.</P><P> ( this happens when the configuration file on the AP repeater gets corrupt)</P><P></P><P>3 Change Ethernet to 100 Bast T Half Duplex.</P><P></P><P>It will work perfectly fine .. </P></BODY></HTML> Mon, 23 Jun 2003 22:41:34 GMT https://community.cisco.com/t5/wireless/problems-with-a-repeater-access-point/m-p/182700#M128390 rsahney 2003-06-23T22:41:34Z