topic Re: How to check WLC2504 remaining AP license quantity in Wireless

How to check WLC2504 remaining AP license quantity

Wei Kwong Ong — Mon, 05 Jul 2021 15:31:40 GMT

As per screenshot, which one is the remaining AP license count?

Re: How to check WLC2504 remaining AP license quantity

Scott Fella — Wed, 18 Apr 2018 14:42:49 GMT

25 seems to be what you have licensed as far as installed to that controller. The top is a default base. You can also see what’s active from the main page in the GUI. The license count is above the controller picture toward the right side.

Re: How to check WLC2504 remaining AP license quantity

Wei Kwong Ong — Wed, 18 Apr 2018 14:50:32 GMT

Thanks for the quick response! We can only see how many AP license is in the WLC, How about the quantity of the remaining AP license? From this screen shot, does it mean all the 25 AP licenses has been used up? If there is a new AP, a new AP license need to be purchased?

Re: How to check WLC2504 remaining AP license quantity

Scott Fella — Wed, 18 Apr 2018 14:52:40 GMT

What you see ‘25’ is the max number of AP’s you can have with the license you have. You can have up to 75, but that will require purchasing ‘adder’ license.

Re: How to check WLC2504 remaining AP license quantity

Wei Kwong Ong — Wed, 18 Apr 2018 14:55:40 GMT

So counts used means there are 25 AP licenses have been used?

Re: How to check WLC2504 remaining AP license quantity

Scott Fella — Wed, 18 Apr 2018 14:58:40 GMT

No... look at the main page in the GUI. The number of associated AP’s is what you have used. You can have up to 25 AP’s.

Re: How to check WLC2504 remaining AP license quantity

Wei Kwong Ong — Wed, 18 Apr 2018 15:01:04 GMT

So we can only see how many AP is associated, but not how many remaining AP licenses?

Re: How to check WLC2504 remaining AP license quantity

Scott Fella — Wed, 18 Apr 2018 15:03:40 GMT

All you care about is the number of AP’s that will connect to the controller. Also understand that you can only have up to 25 due to license.

How many AP’s do you have and plan on connecting to the WLC? Subtract that from 25 and that will tell you how many you have available.

Re: How to check WLC2504 remaining AP license quantity

Daniel Ordóñez Flores — Wed, 18 Apr 2018 15:30:09 GMT

Hi @Wei Kwong Ong

By CLI you can use "show license capacity" it will show you the number of access points currently joined to the controller, and the number of access points that can still join the controller.

***Please rate the answer if this information was useful***

**Por favor si la información fue util marca esta respuesta como correcta**

*Tu reconocimiento nos alienta a seguir participando en los foros *