topic Re: AP Migration-5500 in Wireless

AP Migration-5500

Vijayarajag — Mon, 05 Jul 2021 15:22:28 GMT

Hi Folks,

I have two WLC 5500 running in production with two different site - I have to move two AP to another site (WLC)- Both WLC have same Version .what is the process to complete successfully ?. Anyone have experience please share .Thanks

Regards,

Vijay

Re: AP Migration-5500

Leo Laohoo — Tue, 13 Mar 2018 08:35:00 GMT

@Vijayarajag wrote:

I have to move two AP to another site

Only two APs? Configure the APs to point to the WLC of your choice. There are several ways of doing this: GUI or CLI.

Re: AP Migration-5500

Ric Beeching — Tue, 13 Mar 2018 08:35:36 GMT

Hi,

on the APs go to High Availability and set the WLC primary name and IP you want and they will move across

Ric

Re: AP Migration-5500

Vijayarajag — Sat, 17 Mar 2018 09:27:31 GMT

Leo ,

Suppose if multiple AP how can I move through GUI or CLI .Thanks

Regards,

Vijay

Re: AP Migration-5500

Vijayarajag — Sat, 17 Mar 2018 09:37:22 GMT

Hi Ric Mate ,

Applied High Availability option on the AP but not moving to the WLC .Thanks

Regards,

Vijay

Re: AP Migration-5500

Ric Beeching — Sun, 18 Mar 2018 06:20:43 GMT

Hi,

So you have a WLC Name and IP set in the HA tab as primary and the APs can ping the WLC you are trying to move them to? The APs will first try and ping a WLC before attempting to move over.

On your WLC where the APs are not joined, can you see a join request? 'show ap join stats summary all'

Re: AP Migration-5500

Vijayarajag — Sun, 18 Mar 2018 08:15:26 GMT

Yes , I can able to ping from AP to WLC IP and Show AP Joined status the AP are not Joined

Re: AP Migration-5500

Siva Rama Krishna Patibandla — Mon, 19 Mar 2018 06:00:53 GMT

Please verify in WLC country code and AP license count

AP Model ?

WLC model ?

can you share the AP and WLC logs

Re: AP Migration-5500

Leo Laohoo — Mon, 19 Mar 2018 06:42:50 GMT

@Vijayarajag wrote:

Applied High Availability option on the AP but not moving to the WLC .Thanks

Post the complete output to the 2nd WLC command of "sh sysinfo".

Also post the complete output the the 1st WLC command of "sh ap config general <AP name>".