Disabling CDP for AP

yasseryy — Mon, 05 Jul 2021 15:01:22 GMT

I want to disable the CDP protocol for a port connecting AP. In this case, how can I manually configure the WLC to discover and manage the AP?

Re: Disabling CDP for AP

Scott Fella — Sun, 24 Dec 2017 09:20:46 GMT

You don’t configure the WLC to discover the AP, the AP needs to discover the WLC. Here is a link to read: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/70333-lap-registration.html

Now if disabling CDP prevents your AP from negotiating PoE, then you might need to enable CDP. So make sure your AP boots and negotiates PoE properly by connecting via console and looking at the output. The output will tell you a lot of things including the WLC discovery.

topic Re: Disabling CDP for AP in Wireless

Disabling CDP for AP

Re: Disabling CDP for AP