https://community.cisco.com/t5/wireless/ip-virtual-nlb-does-not-connect-to-ap/m-p/3025880#M130211 <DIV class="_Ejb"> <DIV id="tw-target"> <DIV class="tw-ta-container tw-nfl" id="tw-target-text-container"> <PRE class="tw-data-text tw-ta tw-text-small prettyprint" data-placeholder="Tradução" id="tw-target-text" style="text-align: left; height: 360px;" data-fulltext="" dir="ltr"><SPAN lang="en">I built an NLB on windows for load balancing of the 2 wireless networks. It turns out that if you put the IP of the radius server it works, but if you put the NLB virtual IP it can not connect ... Is there any configuration that should do beyond the normal ?? If you configure the AP to connect to the network 172.26.1.167 it does not turn on .. The AP is an Aironet 1200</SPAN></PRE> </DIV> </DIV> </DIV> Mon, 05 Jul 2021 13:57:44 GMT Nuno Galego 2021-07-05T13:57:44Z https://community.cisco.com/t5/wireless/ip-virtual-nlb-does-not-connect-to-ap/m-p/3025880#M130211 <DIV class="_Ejb"> <DIV id="tw-target"> <DIV class="tw-ta-container tw-nfl" id="tw-target-text-container"> <PRE class="tw-data-text tw-ta tw-text-small prettyprint" data-placeholder="Tradução" id="tw-target-text" style="text-align: left; height: 360px;" data-fulltext="" dir="ltr"><SPAN lang="en">I built an NLB on windows for load balancing of the 2 wireless networks. It turns out that if you put the IP of the radius server it works, but if you put the NLB virtual IP it can not connect ... Is there any configuration that should do beyond the normal ?? If you configure the AP to connect to the network 172.26.1.167 it does not turn on .. The AP is an Aironet 1200</SPAN></PRE> </DIV> </DIV> </DIV> Mon, 05 Jul 2021 13:57:44 GMT https://community.cisco.com/t5/wireless/ip-virtual-nlb-does-not-connect-to-ap/m-p/3025880#M130211 Nuno Galego 2021-07-05T13:57:44Z