topic It should be Cisco. in Wireless

Aironet AP default password

Nusret Conk — Mon, 05 Jul 2021 13:39:48 GMT

What is the default password for AP1702i access point?

Did you try Cisco/Cisco as

aleopoldie — Mon, 06 Mar 2017 20:03:03 GMT

Did you try Cisco/Cisco as username/password ?

-AL

Al,

Nusret Conk — Mon, 06 Mar 2017 20:09:19 GMT

Al,

That didn't work. Any idea what it takes to reset it to the factory defaults?

It should be Cisco.

aleopoldie — Mon, 06 Mar 2017 20:11:38 GMT

It should be Cisco.

Are you sure it is a factory AP ?

our customer bought a few

Nusret Conk — Mon, 06 Mar 2017 20:25:48 GMT

our customer bought a few months ago a couple of these. Not sure if they configured previously or not but today they want to give them a try.

Not sure if I answered your question of "factory AP"...

Alright, then just reset them

aleopoldie — Mon, 06 Mar 2017 22:18:21 GMT

Alright, then just reset them to factory config and they will have the default password "Cisco"

Hope this helps,

-AL

Nusret,

Sam Smiley — Tue, 07 Mar 2017 15:44:46 GMT

Nusret,

This should get you back to the defaults:

https://popravak.wordpress.com/2014/08/26/resetting-cisco-capwaplwap-access-point-to-factory-defaults/

Regards,
Sam

Thank you Sam and AL

Nusret Conk — Tue, 07 Mar 2017 16:45:04 GMT

Thank you Sam and AL

Re: Aironet AP default password

Alex Pfeil — Mon, 06 May 2019 12:13:36 GMT

I had converted an LWAPP to an autonomous AP. I was then able to telnet into the AP. I thought the username and password would stay the same, but it resets to the default. I was glad to come across this info. The telnet username and password was Cisco after the conversion. Thanks!