topic associate only with one access point in Wireless

associate only with one access point

sbarasiscom — Sat, 03 Jul 2021 21:34:29 GMT

Gentlemen,

I have WLC with 3 accesspoints, all them are shown in wlc and their status enable and REG, my problem is the users can associate only with one access point but they can't associate to the others ???

* Note :

in GUI - Security - AP Policies - authorized AP - there is only ONE I added the other 2 later but the same results.

Any idea ASAP,

Thanks

Re: associate only with one access point

Alejandro Cortes Rivera — Mon, 03 Sep 2007 19:56:12 GMT

so your 3 access pooint are asociated corectly if they show the REG estatus, now check the security parameters in the WLAN TAB.

Re: associate only with one access point

sbarasiscom — Tue, 04 Sep 2007 05:24:02 GMT

Thanks friends,

I found the problem.

The problem is I enabled WLAN Override and I didn't check any SSID , So I disabled it in the APs and now it works normaaly,

Good Luck,