topic Hi Zaheer, in Wireless

implementation queries for cisco wireless AP with controller

zaheer.jahangir1 — Mon, 05 Jul 2021 11:48:33 GMT

hello and greetings to all readers,
I am given a project to implemet cisco wireless AP's with WLC
platforms are Catalyst 2960-X,2504 WLC and Aironet AP's
but the issue is I am not much familiar with wireless technologies can someone pleas guide me that how should i be doing this project.

Regards,
Zaheer Jahangir

Hi,

Sandeep Choudhary — Sun, 20 Mar 2016 15:51:23 GMT

Hi,

Here is the WLC deployment guide :

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

Basic config on switch for WLC and AP:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69719-wlc-lwap-config.html

Regards

Dont forget to rate helpful posts

Hi Zaheer,

Prabath Godevithanage — Sun, 20 Mar 2016 22:32:14 GMT

Hi Zaheer,

assuming you would have at least a dozen of APs..I would start with a small site interview and at least with a basic site survey rather than chucking the AP's here and there.

As for the configuration,deployment guide refereed by Sandeep would be an excellent start for you to get the things going in the lab

Thanks Sandeep for this

zaheer.jahangir1 — Mon, 21 Mar 2016 05:43:26 GMT

Thanks Sandeep for this helpful content, it will help me for sure,
and preranda i am having total of 4 sites with each site including a total of 15 AP's.....but the issue is I am not comfortable with Wireless technologies as i Have never worked on them before
but thanks for the support now i am sure i can get some fruitful result.