topic WLC CLI command: sh ap auto in Wireless

How can I see an AP neighbors

Majid Jalinousi — Mon, 05 Jul 2021 11:25:03 GMT

Hi buddies,

I've deployed a vwlc 8.0.120 and some Cisco 2700 series APs.

I want to know is there any way to find out each AP is neighbor with which APs through vWLC?

BR,

Majid.

Leo Laohoo — Sat, 19 Dec 2015 11:57:05 GMT

WLC CLI command: sh ap auto-rf 802.11a <AP Name>

Majid Jalinousi — Sun, 20 Dec 2015 05:41:25 GMT

Thanks Leo,

Is there anyway to see this in vWLC GUI?

Leo Laohoo — Sun, 20 Dec 2015 08:13:24 GMT

Is there anyway to see this in vWLC GUI?

This method will depend on the firmware the vWLC is running.

1. Monitor > Access Points > Radios > Choose either 802.11a or 802.11b.

2. To the right of the AP of your choice, there's a drop down box. Choose Detail.

3. Scroll all the way to the bottom under the heading "Rx Neighbor Information".

Thierry C — Thu, 06 Feb 2025 08:30:25 GMT

In CLI : show ap cdp neighbors