topic You are correct, you have a in Wireless

Cannot connect to 3702E AP using IP and browser

johnbouman — Mon, 05 Jul 2021 11:15:03 GMT

Hi, I just bought the Cisco 3702e AP and I am unable to connect to it using IE and it's IP address. I can Ping the IP and I can Telnet into it but I am not any good at using the Command Line Interface. I am trying to replace my current Cisco AP1024N AP with the faster 3702E AP, I can connect to the AP1024N using IE and the IP address without any problem. Can anyone assist me with this?

Refer the link : http://www

mohanak — Wed, 18 Nov 2015 09:54:15 GMT

Refer the link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html#44264

Thanks, the link does not

johnbouman — Wed, 18 Nov 2015 17:17:16 GMT

Thanks, the link does not address the 3702E AP, I need to be able to operate this AP in Autonomous mode, it is currently looking to find a "CAPWAP" server so I think it is running as LWAPP?

You are correct, you have a

Bruce Winters — Wed, 18 Nov 2015 18:23:01 GMT

You are correct, you have a lightweight AP.

Can use this process to

johnbouman — Wed, 18 Nov 2015 22:44:55 GMT

Can use this process to switch to autonomous mode? https://www.youtube.com/watch?v=T8T__dkg7P4 , if so, I need to find out if there is firmware available for the CAP3702E to run in the autonomous mode.

I just found this as well, apparently the firmware is available for download, (with a current support agreement in place).

https://supportforums.cisco.com/discussion/12153196/access-point-doing-80211ac-autonomous-mode