topic Here you go for some good in Wireless

Wifi disconnection - AP

techguy — Mon, 05 Jul 2021 10:49:21 GMT

Hi,

In my office building we have around 4 Cisco autonomous AP (different models.) When i move my device (lapto or mobile) then at some places wifi gets disconnected. Any reason?

Hi,There could be a million

Ric Beeching — Sun, 23 Aug 2015 14:55:00 GMT

Hi,

There could be a million and one reasons but the most simple/obvious one would be that you have no coverage in the areas you are walking to? Following that, roaming is not as fluid between Autonomous APs as it is between Lightweight (controller-based) APs so your device would stay with the original AP for a long time until the signal is really bad, then move on to the new one closest to you within a few seconds.

Does that help at all..?

You must conduct a site

mohanak — Mon, 24 Aug 2015 13:23:38 GMT

You must conduct a site survey in order to install a wireless network. Conduct the site survey on the actual site under normal operating conditions with all inventory present. Such a survey is critical because the radio frequency (RF) behavior varies with the physical properties of the site, and you cannot predict the behavior accurately without a site survey. You can face intermittent connectivity at certain areas and during certain environmental conditions.

Here you go for some good

Prakash Parvathala — Mon, 24 Aug 2015 15:54:00 GMT

Here you go for some good site survey best practice links and FAQs

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html

Faqs

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68666-wireless-site-survey-faq.html