topic Re: Radius-base VLAN access control. in Wireless https://community.cisco.com/t5/wireless/radius-base-vlan-access-control/m-p/601922#M13222 <HTML><HEAD></HEAD><BODY><P>Keep in mind that if you are using Cisco access points (1230, 1242AG, 1131AG) you will only have eight VLANs available.</P><P></P></BODY></HTML> Mon, 24 Jul 2006 09:18:40 GMT johnruffing 2006-07-24T09:18:40Z Radius-base VLAN access control. https://community.cisco.com/t5/wireless/radius-base-vlan-access-control/m-p/601921#M13221 <P>Hi Sir,</P><P></P><P>I would like to use Radius-based Vlan access control through WLAN as the number of SSID map to wired VLAN is limited to only 16. I have an ACS 4.0 But i wish to use AD to manage my user profile. How can I set the following to enable Radius-based VLAN access control?</P><P></P><P>IETF 64 (tunnel Type)-set this to 'VLAN'</P><P>IETF 65 (tunnel Medium Type)- Set this to '802'</P><P>IETF 81 (tunnel Private Group ID)-set this to VLAN-ID</P><P></P><P>Or Radius-based VLAN Access Control can only be achieved when local user database is stored in ACS.</P><P></P><P>Please advise.</P><P>Thank you.</P><P>Delon</P> Sun, 04 Jul 2021 19:43:30 GMT https://community.cisco.com/t5/wireless/radius-base-vlan-access-control/m-p/601921#M13221 c.ong 2021-07-04T19:43:30Z Re: Radius-base VLAN access control. https://community.cisco.com/t5/wireless/radius-base-vlan-access-control/m-p/601922#M13222 <HTML><HEAD></HEAD><BODY><P>Keep in mind that if you are using Cisco access points (1230, 1242AG, 1131AG) you will only have eight VLANs available.</P><P></P></BODY></HTML> Mon, 24 Jul 2006 09:18:40 GMT https://community.cisco.com/t5/wireless/radius-base-vlan-access-control/m-p/601922#M13222 johnruffing 2006-07-24T09:18:40Z