topic enable ssh for all the ap? in Wireless

enable ssh for all the ap?

raymond wang — Mon, 05 Jul 2021 07:39:54 GMT

Can I enable the ssh for all the AP which connected to the controller- either from controller or from PI? It take much time to configure the AP one by one...

Thanks

Higo to WLC CLI & apply the

Rasika Nayanajith — Thu, 10 Apr 2014 20:38:31 GMT

go to WLC CLI & apply the below command

(5508-1) >config ap ssh enable all

SSH will be enabled in the Cisco APs joining henceforth

(5508-1) >save config

Are you sure you want to save? (y/n) y

Configuration Saved!

HTH

Rasika

**** Pls rate all useful responses ***

Hi Rasika, which version are

raymond wang — Thu, 10 Apr 2014 20:45:00 GMT

Hi Rasika,

which version are you using? from the 7.0.98 i do not have this "all" configuration..

(Cisco Controller) >config ap ssH enable ?

<Cisco AP> Enter the name of the Cisco AP.

(Cisco Controller) >config ap ssH enable all

Cisco AP name is invalid.

I am running 7.6.x & looks

Rasika Nayanajith — Thu, 10 Apr 2014 21:18:28 GMT

I am running 7.6.x & looks like it is a feature added in that version. Even 7.4.x I cannot see that option.

(5508-1) >show sysinfo

Manufacturer's Name............................ Cisco Systems Inc.
Product Name................................... Cisco Controller
Product Version................................ 7.6.100.8

HTH

Rasika

*** Pls rate all useful responses ****

up need to upgrade .

kaaftab — Fri, 11 Apr 2014 13:46:51 GMT

up need to upgrade .

thanks Rasika

raymond wang — Fri, 11 Apr 2014 13:48:45 GMT

thanks Rasika

If you have prime

M. Wisely — Fri, 11 Apr 2014 14:32:12 GMT

If you have prime infrastructure, you can create a lightweight AP template that enables SSH and then select all your APs. This should work for all controller code versions.

Re: enable ssh for all the ap?

StevenH9608 — Fri, 02 Oct 2020 12:02:16 GMT

I am not on this version but any new people finding this thread:

Cisco WLC > Advanced > Wireless > Access Points > Global Configuration > Global Telnet SSH > SSH

Re: enable ssh for all the ap?

kamal4zmi — Thu, 11 Jan 2024 02:03:52 GMT

do i need to create usrname ands password for it?