topic Re: Cisco AP LED Status in Wireless

Cisco AP LED Status

bouchal-38 — Mon, 05 Jul 2021 07:12:57 GMT

Hello,

I would like to know if someone can tell me what means the LED status?

When it is blinkink, or OFF?

Rightnow, i have the LED OFF, bur the SSID is working, the broadcast is working...

What does it mean?

Tx,

Scott Fella — Tue, 18 Feb 2014 13:50:31 GMT

You can enable and disable the LED on an access point if you want. Here is a link and most likely why your AP works but is in a disabled state. I'm assuming it's a lightweight AP

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010000001.html

Sent from Cisco Technical Support iPhone App

Scott Fella — Tue, 18 Feb 2014 13:54:27 GMT

For autonomous, the command is led display off or led display dim.

Sent from Cisco Technical Support iPhone App

Victor Vasantha Kumar — Tue, 18 Feb 2014 15:20:37 GMT

Hi ,

Please refer the following doc. for more information.

Let us know if you are looking for anyting in particular ( any AP model)

Regards
Victor V

*****Help out other by using the rating system and marking answered questions as *****Answered"*****

manassin — Tue, 18 Feb 2014 16:28:41 GMT

Hi,

What is the model of the AP

Is it a Standalone AP or LWAP.

You can refer to the following link for the LED status:

Check table 7-1

It is for 1200 series AP.

Please let me know the exact model of your AP.

Thanks and regards,

Manas Pratap Singh