topic Password recovery if AP is configured with "no boot mode-button in Wireless

Password recovery if AP is configured with "no boot mode-button "

vijay kumar — Mon, 05 Jul 2021 07:02:42 GMT

Hi All ,

Is there any password recovery procdure available for the AP that is configured with

no boot mode-button . Or should we need to contact only TAC?

Thanks,

Regards,

Vijay

Password recovery if AP is configured with "no boot mode-button

Sandeep Choudhary — Fri, 24 Jan 2014 12:20:38 GMT

Hi Vijay,

Please check if these method can Help you:

Web Browser Method

Web browser method

Follow these steps to delete the current configuration and return all wireless device settings to the factory defaults using the web browser interface:

Step 1 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x).

Step 2 Enter the wireless device IP address in the browser address line and press Enter. An Enter Network Password screen appears.

Step 3 Enter your username in the User Name field.

Step 4 Enter the wireless device password in the Password field and press Enter. The Summary Status page appears.

Step 5 Click System Software and the System Software screen appears.

Step 6 Click System Configuration and the System Configuration screen appears.

Step 7 Click the Reset to Defaults or Reset to Defaults (Except IP) button.

Note

Select Reset to Defaults (Except IP) if you want to retain a static IP address.

Step 8 Click Restart. The system reboots.

Step 9 After the wireless device reboots, you must reconfigure the wireless device by using the Web-browser interface or the CLI. The default username and password are Cisco, which is case-sensitive.

for more

https://supportforums.cisco.com/docs/DOC-4532

Regards

Password recovery if AP is configured with "no boot mode-button

Sandeep Choudhary — Fri, 24 Jan 2014 12:27:41 GMT

Also check this document:

https://supportforums.cisco.com/docs/DOC-5456

Regards

Dont forget to rate helpful posts

Re: Password recovery if AP is configured with "no boot mode-bu

Scott Fella — Fri, 24 Jan 2014 13:23:03 GMT

You need to contact TAC if you cannot login to the unit.

https://supportforums.cisco.com/docs/DOC-16219

Sent from Cisco Technical Support iPhone App