show Commands to check AP config

johnlloyd_13 — Sun, 04 Jul 2021 08:15:18 GMT

hi all,

i configured a Cisco 1231 AP and would like to know what are the usual and helpful commands to know if it's working esp on the radio part. TIA!

#sh ver

Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 23-Aug-06 16:42 by kellythw

ROM: Bootstrap program is C1200 boot loader

BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

AP uptime is 21 hours, 52 minutes

System returned to ROM by power-on

System restarted at 06:09:14 UTC Tue Nov 12 2013

System image file is "flash:/c1200-k9w7-mx.123-8.JEA/c1200-k9w7-mx.123-8.JEA"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 15138K/1236K bytes of memory.

Processor board ID FOC10514NQM

PowerPC405GP CPU at 196Mhz, revision number 0x0145

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:1A:6C:17:A1:BE

Part Number : 73-8704-14

PCA Assembly Number : 800-23211-14

PCA Revision Number : A0

PCB Serial Number : FOC10514NQM

Top Assembly Part Number : 800-29026-01

Top Assembly Serial Number : FTX1104R05N

Top Revision Number : A0

show Commands to check AP config

Leo Laohoo — Wed, 13 Nov 2013 05:09:45 GMT

"sh dot11 ass" shows you what clients are associated and what their respective IP address is.

show Commands to check AP config

johnlloyd_13 — Wed, 13 Nov 2013 05:24:44 GMT

thanks pre!

i'm fairly new to wireless as you can see.

will start from here and check out this command.

#show dot11 bssid

Interface BSSID Guest SSID

Dot11Radio0 0019.e8af.1780 Yes WIFI_INTERNET

Dot11Radio0 0019.e8af.1781 No CREW

Dot11Radio0 0019.e8af.1782 No WIRELESS

do you have quick list of the show commands you usually issue?

show Commands to check AP config

Rasika Nayanajith — Wed, 13 Nov 2013 06:16:25 GMT

I normally use "show dot11 associations" & "show dot11 association " commands most of the time

HTH

Rasika

show Commands to check AP config

Leo Laohoo — Wed, 13 Nov 2013 07:31:55 GMT

"sh dot11 ***" s

L1ntik!

It's "sh dot11 associate".

topic show Commands to check AP config in Wireless

show Commands to check AP config

show Commands to check AP config

show Commands to check AP config

show Commands to check AP config

show Commands to check AP config