topic Re: Enabling Wireless Roaming Between Standalone AP in Wireless

Enabling Wireless Roaming Between Standalone AP

Islam Nadim — Sun, 04 Jul 2021 07:09:23 GMT

Hello All,

I'm about to purchase 2 Aironet APs, either 1140 or 1160 Series for a small Business. I know too little about the AP installation. Can someone guide me how to let both APs works in Roaming Mode so that users can move freely within the site without having to drop and connect from one AP to the other.

Best Regards,

Islam M. Nadim

Re: Enabling Wireless Roaming Between Standalone AP

Stephen Rodriguez — Thu, 30 May 2013 23:29:07 GMT

So long as the ssid and encryption are the same, and there is overlap between the cells the client should roam between the AP.

Steve

Sent from Cisco Technical Support iPhone App

Enabling Wireless Roaming Between Standalone AP

Islam Nadim — Thu, 30 May 2013 23:56:59 GMT

Hello Steve,

So no special configuration done on any/both of the APs? I have no wireless controller installed, so I'll be managing the APs via CLI or Web ..

Best Regards,

Islam M. Nadim

Re: Enabling Wireless Roaming Between Standalone AP

Stephen Rodriguez — Fri, 31 May 2013 01:59:09 GMT

Correct. There is no special config needed

Steve

Sent from Cisco Technical Support iPhone App

Re: Enabling Wireless Roaming Between Standalone AP

Richard Atkin — Fri, 31 May 2013 05:46:16 GMT

No extra special config needed.

Sent from Cisco Technical Support iPhone App