topic Re: default ap's in Wireless

default ap's

glen.grant — Sun, 04 Jul 2021 05:39:16 GMT

We are decommisioning a big site and we are looking at having to default the configs on about 40-50 ap's. Other than manually logging into each ap via the controllers and defaulting them is there an easy way to default a bunch of them at once via either the controller or we have WCS at our disposal. So far have not found a way in WCS to do this , you default controllers easy enough but haven't found a way via WCS to do mass ap's though I could be missing something obvious.

Re: default ap's

Scott Fella — Wed, 12 Sep 2012 16:43:39 GMT

WCS doesn't have that feature. Or you can create a simple script and use the CLI:

clear ap config

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

default ap's

George Stefanick — Wed, 12 Sep 2012 16:43:58 GMT

If you console into the ap and delete private config

If you log into the controller you can delete the ap config by selecting the ap and hitting the clear all config button on the right

I suspect you can do a WCS template for this as well, dont have WCS in front of me to check

Hope this helps

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Re: default ap's

George Stefanick — Wed, 12 Sep 2012 16:49:30 GMT

Just double checked... no love on WCS ...

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Re: default ap's

Scott Fella — Wed, 12 Sep 2012 16:51:49 GMT

That would be bad in case you had a disgruntled employee

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re: default ap's

Stephen Rodriguez — Wed, 12 Sep 2012 16:51:51 GMT

pull the names of the AP either out of WCS or the WLC. then create a text file

clear ap config < AP Name>

rinse, repeast for all the AP, then paste into the CLI of the WLC. Or use the WLC to push this as a CLI template.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Re: default ap's

glen.grant — Wed, 12 Sep 2012 16:56:52 GMT

Yeah that might work , in WCS I can make a CLI template with all the entries and just run it against the controller ,

clear ap config 1

clear ap config 2

etc....

Thanks...

Re: default ap's

George Stefanick — Wed, 12 Sep 2012 16:57:35 GMT

Disgruntled employees, huh who has any of those ! Oh, you must mean Leo or Steve ..

LOL

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Re: default ap's

Scott Fella — Wed, 12 Sep 2012 17:47:29 GMT

Yup those two!

Sent from Cisco Technical Support iPhone App