topic AP discovery method document in Wireless

AP discovery method document

jaysilva6 — Sun, 04 Jul 2021 05:31:36 GMT

Hello expers,

With the Cisco controller based wireless designs we could use the DHCP option 43 or the DNS method for AP discovery.

How do you decide which one to use? I'm after latest Cisco ducmentation which either specify one over the other as best practise or provide a compairson of the two discovery methods.

Thanks,

Silva

AP discovery method document

Stephen Rodriguez — Tue, 14 Aug 2012 00:51:23 GMT

either one works, and works well. It all depends on the particualr setup of the network.

I've seen customers that do not break up DNS based on regoion, so cisco-capwap-controller.example.com wouldn't work, as they would only have the one entry for the WLC in the HQ. and they wanted to keep everything seperate i.e. no mobility outside the region.

if you had subdomais, cisco-capwap-controller.east.example.com (east coast) and cisco-capwap-controller.west.example.com ( west coast), it works better.

Option 43 is a bit more flexible, as you can do that per scope, and set a different WLC per scope, and per AP type.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

AP discovery method document

jaysilva6 — Tue, 14 Aug 2012 03:43:03 GMT

Hi Steve,

Thanks for the input.

You mentioned "I've seen customers that do not break up DNS based on regoion, so cisco-capwap-controller.example.com wouldn't work, as they would only have the one entry for the WLC in the HQ. "

Suppose we have n number of controllers in HQ and all belong to the same region.

Is it possible to use a single DNS entry along with aliases for the remaining n-1 controllers?

Something like a 1 : many mapping at the DNS level.

Thanks,

Silva

AP discovery method document

fbarboza — Wed, 15 Aug 2012 16:40:11 GMT

Hi ,

Here is the link that explains how to get option 43 configured.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Here is the link that explains how to get DNS option configured.

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00809d5097.shtml

Now which one to use would be a designe call on what option works best for you.

Re: AP discovery method document

jaysilva6 — Tue, 21 Aug 2012 06:00:47 GMT

thanks gentleman.