topic Process for Conversion to IOS based AP in Wireless

Process for Conversion to IOS based AP

Mikey John — Sun, 04 Jul 2021 05:24:08 GMT

Hi ,

I have a 1131 Access point (AIR-LAP1131AG-N-K9) with me and I need to convert this into an IOS based standalone Access point.

Could you please let me know the tool to convert this and the procedure to follow?

Appreciate your help.

Thanks

Mikey

Re: Process for Conversion to IOS based AP

Scott Fella — Sat, 14 Jul 2012 16:18:21 GMT

Here are some link you can look at:

https://supportforums.cisco.com/docs/DOC-14960

https://learningnetwork.cisco.com/thread/14405

Sent from Cisco Technical Support iPad App

Re: Process for Conversion to IOS based AP

Amjad Abdullah — Sat, 14 Jul 2012 16:37:00 GMT

www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

Sent from Cisco Technical Support iPad App

Re: Process for Conversion to IOS based AP

Mikey John — Mon, 16 Jul 2012 18:17:50 GMT

Hi,

Thanks for your reply. I have downloaded the tar image "c1130-k9w7-tar.124-21a.JY", but I cannot find the "Archive" command in the APs CLI.

AP68ef.bd48.118c#archive ?

% Unrecognized command

Please let me know what Iam doing wrong here?

Thanks

Mikey

Re: Process for Conversion to IOS based AP

Amjad Abdullah — Mon, 16 Jul 2012 18:38:42 GMT

Use the command (debug capwap console cli).

That should unlock the archive command.

P.s: use "lwapp" instead of "capwap" if the previous command did not work.

Sent from Cisco Technical Support iPad App

Process for Conversion to IOS based AP

Mikey John — Mon, 16 Jul 2012 18:45:54 GMT

I have only the below two options listed in the debug commands.

AP68ef.bd48.118c#debug cap?

% Unrecognized command

AP68ef.bd48.118c#debug lwapp ?

client LWAPP Client Debug Options

mfp LWAPP MFP Debug Options

Re: Process for Conversion to IOS based AP

Scott Fella — Mon, 16 Jul 2012 18:47:59 GMT

It's hidden... You just need to type the command.

Sent from Cisco Technical Support iPhone App

Process for Conversion to IOS based AP

Mikey John — Mon, 16 Jul 2012 19:16:08 GMT

It worked..Thank you guys.

Could you please point me to a good documentation for setting up wireless. I have static IP given by the service provider.

Thanks

Mikey

Re: Process for Conversion to IOS based AP

Leo Laohoo — Mon, 16 Jul 2012 22:31:32 GMT

Wow Scott and Amjad!

I've never seen sooooo many correct recommendations and get a "3" ratings.

Both of you must've said something to upset the person who gave both of you the rating!

Added (+5) to each of the "3".

Re: Process for Conversion to IOS based AP

Scott Fella — Mon, 16 Jul 2012 22:33:23 GMT

Your too funny Leo! I'll give you a 5 for that:)

Sent from Cisco Technical Support iPhone App

Process for Conversion to IOS based AP

Leo Laohoo — Mon, 16 Jul 2012 22:52:17 GMT

LOL!

Re: Process for Conversion to IOS based AP

Amjad Abdullah — Tue, 17 Jul 2012 05:13:43 GMT

another +5 Leo. Your rating is better than me and Scoot for this thread