topic How to view RF neighbors from AP in Wireless

How to view RF neighbors from AP

nikhilcherian — Sun, 04 Jul 2021 04:57:15 GMT

Hi All,

Is there a way I can see the RF neighbors from a AP joined with the WLC, can the show controllers dot11radio 0 will help in this

Regards

NikhiL

Re: How to view RF neighbors from AP

Scott Fella — Thu, 05 Apr 2012 08:26:21 GMT

Well I know the show run-config has that info. The config analyzer might be easier to review since how it's broken down.

Thanks,

Scott Fella

Sent from my iPhone

Re: How to view RF neighbors from AP

Stephen Rodriguez — Thu, 05 Apr 2012 11:55:31 GMT

You can do it from the WLC. Go into the GUI, from the main page choose tge radios on the left menu, and pick the particular AP you want to view. When that page comes up switch to text view, should be upper right.

This will show you what neighbors are heard by the AP. this will only show you the Mac address of the AP, not the name.

So if you are looking ti see how OPW ( other people's wireless) is heard you need to do a bit of correlation. Between your AP macs and what's not yours.

Steve

Sent from Cisco Technical Support iPhone App

How to view RF neighbors from AP

nikhilcherian — Fri, 06 Apr 2012 11:20:49 GMT

Thanks Scot, for the help

How to view RF neighbors from AP

nikhilcherian — Fri, 06 Apr 2012 11:24:19 GMT

Steve

I dint get the text view option, which link was that

Regards

NikhiL

Re: How to view RF neighbors from AP

Stephen Rodriguez — Fri, 06 Apr 2012 12:03:42 GMT

From the main page on the left Monitor Radio. Pick the radio. From there you should have an option for text view

Steve

Sent from Cisco Technical Support iPhone App

How to view RF neighbors from AP

nikhilcherian — Sat, 07 Apr 2012 03:35:15 GMT

Steve,

Got it thanks

Regards

NikhiL

Re: How to view RF neighbors from AP

Males — Wed, 22 Nov 2023 00:02:24 GMT

Hey guys

I find myself revisiting this old thread tonight and since I found the answer to the original poster's question, I cannot resist but to leave it here, should anyone look for it some day.

You can view this information also by ssh'ing into the AP (AireOS APs here...yes, those ol' guys) and issuing

show capwap rm neighbor-list

It does not display a nice name like 'MyOldAP' but it does give you the bssid...and thus you can figure out who the neighbors are.

Enjoy!

Mae