topic Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment in Wireless

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment resetting to default after rebooting

mcaoile — Sun, 04 Jul 2021 04:46:01 GMT

Hi,

I have noticed when I was staging/priming the Cisco 1522, in the 802.11 b/g/n radio configuration, after setting the RF channel and TC power level to global and the Cisco 1522 reboots, the RF channel and TC power level reverts back to the default values (RF Channel - 13 and TX Power Level - 1). The code of the WLC is 7.0.98. Has anyone of you encountered this kind of problem?

Regards,

Manuelito

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

Surendra BG — Sat, 10 Mar 2012 07:46:31 GMT

Hi,

Looks like similar issue pointed in this bug..

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj82323

Please upgrade the code to 7.0.230 or 7.0.220 and see if you are able to reproduce the same..

Please dont forget to rate the usefull posts!!

Regards

Surendra

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

mcaoile — Tue, 27 Mar 2012 06:07:59 GMT

thanks a lot. upgraded WLC to 7.0.230 and problem rectified.

Cisco 1522 AP RF Channel Assignment & TX Power Level Assignment

Surendra BG — Wed, 28 Mar 2012 01:57:22 GMT

Awesome!!