topic different IP addresses for same AP in Wireless

different IP addresses for same AP

vishalpatil86 — Sun, 04 Jul 2021 03:19:41 GMT

HI,

i have configured autonomous AP with IP 172.16.10.127 and brought it in network

it is directly connected to core switch. when i do sh cdp neighbor gig6/8 detail, it is showing IP address of AP as 172.16.10.68.

help on this..

Surendra BG — Sat, 18 Jun 2011 05:08:50 GMT

ok!! get the access to the AP and assign the IP address again manually..

conf t

int bvi 1

ip addr

no shut

end

See if we are still able to get other IP addr..

Regards

Surendra

vishalpatil86 — Sat, 18 Jun 2011 05:26:11 GMT

hi surendra,

when i got console and do sh ip int br, it showed -

Interface IP-Address OK? Method Status Prot

ocol

BVI1 172.16.10.127 YES NVRAM up up

Dot11Radio0 unassigned YES NVRAM up up

Dot11Radio1 unassigned YES NVRAM administratively down down

FastEthernet0 172.16.10.68 YES NVRAM up up

fastethernet was different.. how it was something different?

i configured this AP from web interface.

thanx for the help

Leo Laohoo — Sat, 18 Jun 2011 05:35:50 GMT

Your management IP address should be the BV1 and not the FastEthernet0. You don't need to assign an IP address to the FE.

Surendra BG — Sat, 18 Jun 2011 05:40:33 GMT

Hi,

As leo stated. the IOS AP should be assigned the IP on BVI interface not any where else!!

Regards

Surendra