Autonomus AP config issues

Marco Villani — Sat, 03 Jul 2021 23:51:28 GMT

Hello, i'm configuring 3 AP 1131, with 2 profile Guest and Inoffice. the 3 AP are going to be connected to a 3560 and they are going to have Vlan and a 2811 is going to be configured as a DHCP.now all i can see when i search for available network is the guest SSID and if connect i don't get any Ip address. Any idea. I'm attaching the AP config. Thanks.

Re: Autonomus AP config issues

Marco Villani — Fri, 05 Dec 2008 23:07:41 GMT

Hello, so i have setup MBSSID like below,but still my AP broadcast only one SSID,any suggestion?

dot11 ssid EP_Internal

vlan 3

authentication open

mbssid Guest-Mode

dot11 ssid EP_Guest

vlan 4

authentication open

mbssid Guest-Mode

interface Dot11Radio0

mbssid

no ip address

no ip route-cache

Re: Autonomus AP config issues

gamccall — Sat, 06 Dec 2008 15:48:30 GMT

do you have both ssid's enabled under your d0 interface?

interface dot11radio0

ssid EP_Internal

ssid EP_Guest

There's a decent example of an mbssid config here: http://slaptijack.com/networking/cisco-broadcasting-multiple-ssids/

If that's not enough to get you working, post your whole config here.

Re: Autonomus AP config issues

Marco Villani — Sun, 07 Dec 2008 21:29:35 GMT

Yes I do ,below the config. thanks

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname AP_01

clock timezone GMT -5

dot11 vlan-name Data vlan 3

dot11 vlan-name Data vlan 4

dot11 ssid EP_Internal

vlan 3

authentication open

Guest-Mode

dot11 ssid EP_Guest

vlan 4

authentication open

guest-mode

power inline negotiation prestandard source

Username Cisco password Cisco

class-map match-all _class_Data0

match ip dscp default

policy-map Data

class _class_Data0

set cos 0

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

ssid Internal

ssid Guest

speed basic-1.0 basic-2.0 5.5 11.0 18.0 24.0 36.0 48.0 54.0

power local cck 17

power local ofdm 17

power client 17

channel 2412

station-role root

l2-filter bridge-group-acl

interface Dot11Radio0.668

encapsulation dot1Q 668 native

no ip route-cache

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface Dot11Radio0.3

encapsulation dot1Q 3

service-policy input Data

service-policy output Data

no ip route-cache

bridge-group 3

bridge-group 3 subscriber-loop-control

bridge-group 3 input-address-list 701

bridge-group 3 block-unknown-source

no bridge-group 3 source-learning

no bridge-group 3 unicast-flooding

bridge-group 3 spanning-disabled

interface Dot11Radio0.4

encapsulation dot1Q 4

service-policy input data

service-policy output data

no ip route-cache

bridge-group 4

bridge-group 4 subscriber-loop-control

bridge-group 4 input-address-list 700

bridge-group 4 block-unknown-source

no bridge-group 4 source-learning

no bridge-group 4 unicast-flooding

bridge-group 4 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

hold-queue 160 in

interface FastEthernet0.668

encapsulation dot1Q 668 native

no ip route-cache

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

interface FastEthernet0.3

encapsulation dot1Q 3

no ip route-cache

bridge-group 3

no bridge-group 3 source-learning

bridge-group 3 spanning-disabled

interface FastEthernet0.4

encapsulation dot1Q 4

no ip route-cache

bridge-group 4

no bridge-group 4 source-learning

bridge-group 4 spanning-disabled

interface BVI1

ip address xxx.xxx.x.x 255.255.255.0

no ip route-cache

ip default-gateway xxx.xxx.x.x

no ip http server

bridge 1 route ip

line con 0

password cisco

line vty 0 4

password cisco

line vty 5 15

password cisco

transport output all

end

topic Autonomus AP config issues in Wireless

Autonomus AP config issues

Re: Autonomus AP config issues

Re: Autonomus AP config issues

Re: Autonomus AP config issues