topic AP 1242 in Wireless https://community.cisco.com/t5/wireless/ap-1242/m-p/1005037#M137032 <P>I have 1242 AP whose IP address is configured as static. I need my clients to associate with the AP, and get IP address assigned by AP. But I didn't find any option where I can put the range for the DHCP. Kindly guide me</P><P>Cheers</P><P></P> Sat, 03 Jul 2021 23:03:24 GMT mansoor9349 2021-07-03T23:03:24Z AP 1242 https://community.cisco.com/t5/wireless/ap-1242/m-p/1005037#M137032 <P>I have 1242 AP whose IP address is configured as static. I need my clients to associate with the AP, and get IP address assigned by AP. But I didn't find any option where I can put the range for the DHCP. Kindly guide me</P><P>Cheers</P><P></P> Sat, 03 Jul 2021 23:03:24 GMT https://community.cisco.com/t5/wireless/ap-1242/m-p/1005037#M137032 mansoor9349 2021-07-03T23:03:24Z Re: AP 1242 https://community.cisco.com/t5/wireless/ap-1242/m-p/1005038#M137033 <HTML><HEAD></HEAD><BODY><P>Configure this:</P><P></P><P>ip dhcp pool <NAME> </NAME></P><P>network x.x.x.x 255.255.255.0 </P><P>default-router x.x.x.x </P><P></P><P>ip dhcp excluded-address <LOWEST ip=""> <HIGHEST ip=""></HIGHEST></LOWEST></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1000999" target="_blank">http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1000999</A></P><P></P></BODY></HTML> Fri, 20 Jun 2008 12:30:52 GMT https://community.cisco.com/t5/wireless/ap-1242/m-p/1005038#M137033 Scott Fella 2008-06-20T12:30:52Z Re: AP 1242 https://community.cisco.com/t5/wireless/ap-1242/m-p/1005039#M137034 <HTML><HEAD></HEAD><BODY><P>It seems that I need to configure the DHCP pool for my clinets on CLI mode. Is there any way to use the GUI mode in order to configure the same on 1242</P><P></P><P>Cheers</P></BODY></HTML> Sat, 21 Jun 2008 04:53:42 GMT https://community.cisco.com/t5/wireless/ap-1242/m-p/1005039#M137034 mansoor9349 2008-06-21T04:53:42Z Re: AP 1242 https://community.cisco.com/t5/wireless/ap-1242/m-p/1005040#M137035 <HTML><HEAD></HEAD><BODY><P>I'm 99% sure you have to configure DHCP Scope via the CLI. I have never found that option in the GUI.</P></BODY></HTML> Sat, 21 Jun 2008 11:03:52 GMT https://community.cisco.com/t5/wireless/ap-1242/m-p/1005040#M137035 Scott Fella 2008-06-21T11:03:52Z