topic Re: AP 1250 CLI command in Wireless

AP 1250 CLI command

58182 — Sat, 03 Jul 2021 22:12:56 GMT

What's the command to enable ssid's broad cast.

All I see is GUI examples in the doc's, but no cli examples.

Re: AP 1250 CLI command

Scott Fella — Tue, 15 Jan 2008 22:59:05 GMT

Under the SSID configure GUEST-MODE

Here is a link.. hope this helps.

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap7-mbssid.html#wp1017196

Re: AP 1250 CLI command

58182 — Wed, 16 Jan 2008 20:49:21 GMT

I looked at it; I didn't see any cli commands to enable or disable broadcasting ssid's.

Re: AP 1250 CLI command

Rob Huffman — Thu, 17 Jan 2008 00:57:48 GMT

Hi Denis,

This command that Scott correctly noted does enable the SSID to be broadcast;

Step 6 guest-mode

(Optional) Designate the SSID as your access point's guest-mode SSID. The access point includes the SSID in its beacon and allows associations from client devices that do not specify an SSID.

Give it a try 🙂 It doesn't mention broadcast but this is what it actually means.

Rob

Re: AP 1250 CLI command

58182 — Mon, 21 Jan 2008 14:44:34 GMT

you're right, it works. Who would of known it.

Re: AP 1250 CLI command

Rob Huffman — Mon, 21 Jan 2008 14:48:24 GMT

Hi Denis,

They couldn't just say something nice like "enable Broadcast ssid"

It's always something isn't it 🙂

Take care,

Rob