topic 1000 series AP in Wireless https://community.cisco.com/t5/wireless/1000-series-ap/m-p/430453#M137866 <P>When a client connects to the wireless network it shows that the 1010 light weight access point is still WEP enabled. The reason I think this is because in the 2006 Wireless LAN Controller under Clients &gt; Detail </P><P>AP Properties:</P><P></P><P>WEP state = WEP enable. </P><P></P><P>I have WPA/802.11i checked for the WLAN and also WPA/802.11i checked for Trusted AP&#146;s. I am not sure why it still shows that WEP is enabled?</P> Sun, 04 Jul 2021 18:19:58 GMT zimmermanml 2021-07-04T18:19:58Z 1000 series AP https://community.cisco.com/t5/wireless/1000-series-ap/m-p/430453#M137866 <P>When a client connects to the wireless network it shows that the 1010 light weight access point is still WEP enabled. The reason I think this is because in the 2006 Wireless LAN Controller under Clients &gt; Detail </P><P>AP Properties:</P><P></P><P>WEP state = WEP enable. </P><P></P><P>I have WPA/802.11i checked for the WLAN and also WPA/802.11i checked for Trusted AP&#146;s. I am not sure why it still shows that WEP is enabled?</P> Sun, 04 Jul 2021 18:19:58 GMT https://community.cisco.com/t5/wireless/1000-series-ap/m-p/430453#M137866 zimmermanml 2021-07-04T18:19:58Z Re: 1000 series AP https://community.cisco.com/t5/wireless/1000-series-ap/m-p/430454#M137867 <HTML><HEAD></HEAD><BODY><P>I think WEP is still enabled on the WLAN controller. If you have enabled the WPA for the APs i guess the configuration is not saved on the controller. Try redoing the configuration and save it and check again. It should work.</P><P></P></BODY></HTML> Mon, 21 Nov 2005 16:37:26 GMT https://community.cisco.com/t5/wireless/1000-series-ap/m-p/430454#M137867 wong34539 2005-11-21T16:37:26Z