topic Re: DHCP on AP in Wireless

DHCP on AP

mrba_2000 — Sun, 04 Jul 2021 17:21:08 GMT

Hi there,

I've a broadband connection. I'm connecting my AP 1200 series to it. I can get the ip address from the ISP on my AP but the promblem i'm facing now is:

My client wireless card cannot get authentication therefore i can't get any ip address for my client.

My AP setting currently is a factory setting. Do i need to set any ssid,vlan dhcp pool etc etc.

Can someone please guide me how to set this up?

Tks

razz

Re: DHCP on AP

scottmac — Fri, 14 Jan 2005 20:18:28 GMT

The factory default is an SSID of "tsunami," no authentication, no encryption.

Set your clients for an SSID of tsunami and you should be able to connect OK.

BTW: your clients should be rigged to get DHCP addresses from your ISP: the AP won't do DHCP service unless and until you configure it to do so.

Good Luck

Scott

Re: DHCP on AP

mrba_2000 — Sat, 15 Jan 2005 04:03:14 GMT

Scott,

Tks for the reply. I've also set my client ssid as "tsunami" still can get any connection.

My question was, how to make my AP to do DHCP service.

Tks