AP 1200 Boot problem

jodilovell — Sun, 04 Jul 2021 16:53:46 GMT

Hi all,

I know this issue has been raised before but I haven't seen if there is a resolution to this.

I got a 1231 AP last week and it worked fine for a day, tried to boot it up this morning and it wasn't happy - gave me a red and orange light. When I consoled into it, it was at the boot loader prompt. I read about this issue so I tried two methods to get it to boot: just typing boot being the first one(!!) and the second one was to reboot it with it plugged into the LAN. Both times, it appears to start booting and then just hangs and nothing gets it out of this state. I get the following:

Loading "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4"...###########################################################################################################################################################################################################################################################################################################################

File "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 16-Apr-04 12:22 by cmong

Image text-base: 0x00003000, data-base: 0x0053CF74

Initializing flashfs...

flashfs[1]: 144 files, 6 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 7741440

flashfs[1]: Bytes used: 3692544

flashfs[1]: Bytes available: 4048896

flashfs[1]: flashfs fsck took 3 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

And thats where it stops... Does anyone know if there is some kind of solution to this or does it need to be RMA'd?? Note that nothing changed IOS-wise, since the day that it actually worked!

Thanks!!!

Re: AP 1200 Boot problem

wdrootz — Mon, 23 Aug 2004 17:09:59 GMT

You might want to take a look in the wireless troubleshooting center.

Re: AP 1200 Boot problem

jodilovell — Tue, 24 Aug 2004 06:47:29 GMT

I have done and couldn't find anything except the boot-loader problem. I did also check the bug toolkit and couldn't find anything.

At any rate, I've RMA'd the thing and just gotten another one. So far so good but I haven't heard good things about the 1200's. We'll see how it goes.

Thanks.

topic Re: AP 1200 Boot problem in Wireless

AP 1200 Boot problem

Re: AP 1200 Boot problem

Re: AP 1200 Boot problem