topic AP to Bridge in Wireless

AP to Bridge

Cintifacts — Mon, 05 Jul 2021 06:23:14 GMT

I read up on Cisco's site that you can alter the 350

Series Bridge to be an Access Point. I own the "rugged"

350 Series Access Point, which largely resembles

the multifunction 350 series bridge, and was wondering

if there was some way to make it a bridge.

Thank you,

David

kil.5@nd.edu

Re: AP to Bridge

tepatel — Thu, 29 Aug 2002 04:26:15 GMT

You can configure the 350 series bridge to act as "Access Point" but not the reverse..In other words Access Point can't be configured/chaged as a "bridge".

To make bridge as access point, you do not need to alter the hardware, it can be achived just by configuration.

Re: AP to Bridge

paumercier — Fri, 06 Sep 2002 19:13:00 GMT

tepatel, wrote that the 350 AP can not be used as a bridge (ie 350AP to 350AP), what I want to do is show on figure 1 of the following web page. Do I have to have one 350bridge and 1 350ap or can two 350AP be configured to accomplish the same thing. thx in advance.

http://www.cisco.com/warp/public/cc/pd/witc/ao350ap/prodlit/a350b_ds.htm

regards,

paul